Saturday, August 1, 2009

Complementary Metal Oxide Semiconductor

Complementary Metal Oxide Semiconductor(CMOS) is a small portion of battery powered memory on the motherboard that contains system settings like types of drives, device types in the system, which drive to start up from etc.
The battery used is a 3volt battery.
CMOS and BIOS are often interchanged although they are different things. Think of the BIOS as the skeleton frame upon which the CMOS settings hang.
All computer memory forgets everything it holds when power to it is shut off. If the power was totally shut off to your CMOS, your computer would forget its start up settings, and you’d have to re-enter these settings every time you started your computer! Fortunately this is not the case as your CMOS always receives enough power to remember its settings, even when your computer is off. How? It is powered by a small lithium battery on your motherboard. Lithium batteries are designed to last years, and often outlive the usefulness of the computer they reside in. If you keep a computer long enough, you will have to replace the battery. This is usually an easy task. Just lift the retaining clip, pop out the old battery and put in a new one. Make sure your computer is off though, and beware of static discharge! After you replace the battery, you WILL HAVE TO re-enter all startup settings into CMOS setup.
It is a good idea to enter the CMOS setup and write down the information it contains. Unless you are fairly knowledgeable in computer support, have original manuals or like frustrating experiences, it is a good idea to keep the CMOS information on paper in case it gets erased.
HOW TO GET INTO THE CMOS?
Computers differ on how to enter setup. Normally when you start your computer, it will say something like "Hit or to enter setup. Based on different company or model the cmos entering key also varies " Take note of what key (or combinations of keys to hit. You can safely look around the setup program. If you accidentally change something, just exit without saving
What is CMOS Setup?
Various devices are attached to a computer. These devices have got various parameters such as IRQ settings, DMA channel settings, etc. Thus this information about the devices or peripherals attached to the computer must be known at the time of startup. These parameters are manually set if the devices are of older types that are non-plug-n-play. But if these devices are plug-n-play then the parameters are detected automatically. This information about the devices is to be stored or else it has to be set every time the machine is started. So this information is set and stored in the CMOS setup.
The CMOS has got a jumper. This jumper is used only for clearing the data stored in the CMOS.
Setting up CMOS setup.
The listing below is showing all the information’s stored into the BIOS;
· Time and Date
· Number of Floppy Disk Drives
· Floppy Disk Drives information’s (size, number of track, sectors, head, etc)
· Number of Hard Disk Drives
· Hard Disk Drives information’s (size, number of track, sectors, head, mode, etc)
· Number of CD-ROM Drives
· CD-ROM Drives information’s (operating mode, etc)
· Boot sequence ( Enable the user to decide what disk will be checked first when booting)
· Cache Memory information’s (size, type, timing, etc)
· Main Memory Information’s (size, type, timing, etc)
· ROM Shadowing information’s (Enabling or disabling of Video and System ROM shadow)
· Basic Video mode information’s (EGA, VGA, etc)
· Setting of PCI and ISA slots
· AGP Port Settings (aperture size, etc)
· Virus Protection Warning
· Setting of COM Ports (Enabling or disabling of Com port 2 for instance)
· Password Protection (enable the user to set his password)
· Energy saving information’s (snooze modes for the HDD and monitor)
Depending on your BIOS type there could be many a lot of other information not listed above that can possibly be stored in the BIOS memory. Note that some of the information in the above list may not be a part of the BIOS installed on your computer.

Sunday, July 26, 2009

Add a Map Drive Button to the Toolbar


If you map drives often, use one of these options to add a Map Drive button to the folder toolbar.

  1. Option One (Long Term Fix)
    • Click Start, click My Computer, right-click the toolbar, then unlock the toolbars, if necessary.
    • Right-click the toolbar again, and then click Customize.
    • Under Available toolbar buttons, locate Map Drive, and drag it into the position you want on the right under Current toolbar buttons.
    • Click Close, click OK, and then click OK again.

You now have drive mapping buttons on your toolbar, so you can map drives from any folder window. To unmap drives, follow the above procedure, selecting Disconnect under Available toolbar buttons. To quickly map a drive, try this option.

or

  1. Option Two (Quick Fix)
    • Click Start, and right-click My Computer.
    • Click Map Network Drive.

If you place your My Computer icon directly on the desktop, you can make this move in only two clicks!

Saturday, July 25, 2009

How to Create a Password Reset Disk for computers that are part of a domain

Note that this procedure requires one blank, formatted floppy disk.

To create a password reset disk for your local user account:
  1. Press CTRL+ALT+DELETE. The Windows Security dialog box appears.
  2. Click Change Password . The Change Password dialog box appears.
  3. In the Log on to box, click the local computer. For example, click Computer (this computer) .
  4. Click Backup . The Forgotten Password Wizard starts.
  5. On the "Welcome to the Forgotten Password Wizard" page, click Next .
  6. Insert a blank, formatted disk in drive A, and then click Next .
  7. In the Current user account password box, type your password, and then click Next . The Forgotten Password Wizard creates the disk.
  8. When the progress bar reaches 100 percent complete, click Next , and then click Finish . The Forgotten Password Wizard quits and you return to the Change Password dialog box.
  9. Remove, and then label the password reset disk. Store the disk in a safe place.
  10. In the Change Password dialog box, click Cancel .
  11. In the Windows Security dialog box, click Cancel.
If you forget your password, you can log on to the computer with a new password that you create by using the Password Reset Wizard and your password reset disk.
To gain access to your local user account on a computer that is a member of a domain, or has been disconnected from a domain:
  1. In the Welcome to Windows dialog box, press CTRL+ALT+DELETE.
  2. In the Log On to Windows dialog box, type an incorrect password in the Password box, and then click OK .
  3. In the Logon Failed dialog box that appears, click Reset . The Password Reset Wizard starts. The Password Reset Wizard lets you create a new password for your local user account.
  4. On the "Welcome to the Password Reset Wizard" page, click Next .
  5. Insert the password reset disk in drive A, and then click Next .
  6. On the "Reset the User Account Password" page, type a new password in the Type a new password box.
  7. Type the same password in the Type the password again to confirm box.
  8. In the Type a new password hint box, type a hint that will help you remember the password if you forget it. NOTE : This hint is visible to anyone who attempts to log on to the computer by using your user account.
  9. Click Next , and then click Finish . The Password Reset Wizard quits and you return to the Log On to Windows dialog box. The password reset disk is automatically updated with the new password information. You do not have to create a new password reset disk.
  10. In the Log On to Windows dialog box, type your new password in the Password box.
  11. In the Log on to box, click the local computer. For example, click Computer (this computer) , and then click OK . You are logged on to the local computer with your local account information.

Friday, July 24, 2009

Free 3GP Video Converter

"Convert 3GP files to MP4 and AVI, video with Free 3GP Video Converter"Free

3GP Video converter:-Convert 3GP video files recorded with your cell phone to more common PC video formats AVI or MP4 or back other video files to 3GP. Extract audio from 3GP video files.Convert 3GP to AVI, 3GP to MP4, 3GP to MP3 audio and back AVI, MP4 and others to 3GP. It's clearly free and absolutely safe to install and run.
This 3GP converter is to convert the video files to several format and the main advantage is freeware.You can download it from this site

Download