Configure the virtual memory in Windows Vista

If you don't have too much RAM installed on your system it can be a good idea to increase the size of your virtual memory. Even if your computer has plenty of RAM available, you might still want to configure the size of the swap/paging file or it's location.
As you will see, configuring the virtual memory in Windows Vista is easy. Just follow these steps:

• First, go to your Desktop and right click on Computer. From the right click menu select “Properties”.
• In the System window, simply click on “Advanced system settings”.
• The System Properties window will open directly at the “Advanced” tab. Go to the Performance section and click on the “Settings” button
• In the Performance Options window you will see the current size of the swap/paging file. To configure it click on “Change”.
• By default, Windows Vista manages the paging file size for all your drives. To change this, first you need to deselect the checkbox from the top.
• You can customize the paging file size for each of your drives. By default, the paging file is placed on the "C:" drive and it's automatically managed by the system. If you want to use another partition, select "C:", check the No paging file option and click on “Set”.
• Now you need Windows Vista to create the paging file on another partition. Click on the partition you prefer and then select “Custom size or System managed size”.
If you want to have a custom size paging file you will need to type the initial and the maximum size. For the initial size you should have a few hundred megabytes (usually something close to the amount of RAM installed) and for the maximum size approximately 2.5 - 3 times the size of your RAM.
Some enthusiasts recommended using a fixed size paging file (the same initial and maximum size). If you want to go for this approach the size should be 2.5 - 3 times the size of your RAM. Having a small paging file might affect the performance of your running applications, especially if you are working with applications that require lots of memory.
• When you are done making all the necessary changes, click on OK. If you increased the size of the paging file, Windows Vista won't require a restart to apply the changes. However, if you decreased the size or changed the location of the paging file you will need to restart your PC in order for the changes to take effect.