Common Windows Error Codes and Fix The Problem

While working with an operating system, it is not uncommon to encounter errors. Some errors that occur frequently on a Windows system are compiled in a common Windows error codes list. It may not be difficult to fix the common Windows errors but for certain errors, some level of expertise or an in-depth knowledge of the Windows OS may be required. A consolidated list of common windows problems and solutions is useful for a user when they encounter an error. A common Windows error codes list provides a quick and an easy reference and also a possible solution to fix a common Windows error.

Common Windows Error Codes and How to Fix them!

Below is a list of the most common error codes that you can face while using Windows and its basic components. Some solutions have been provided for you to try to solve them. You should also note that some require the assistance of a computer technician and you should NOT try to fix them yourself as they could seriously damage your computer system.

·        Error #0

Error Message: Connection Successful!

Solution: Does not require any repairs.

·   Error #2

Error Message: System cannot find specified file

Solution: You should reinstall NCP & DUN

·      Error #5

Error Message: Access Denied

Solution:

1. Ensure that you have entered the right username and password in the field labeled "domain" for NT/2k.

2. Check that the option "accept any authentication including clear text" is activated.

·        Error #5

Error Message: Invalid Procedure Call

Solution: Dialup and Network components must be installed again

·   Error #6

Error Message: Stack Overflow

Solution:

1. Try cold booting your computer.

2. If this does not work, the problem might come from your RAM or the Swap file.

·   Error #20

Error Message: The system cannot find the specified device

Solution:

1. Ensure that the right modem has been selected.

2. If it does not respond, try to reinstall it.

3. You can also try to reinstall NCP/DUN/RAS.

·        Error #71

Error Message: No more connections is allowed

Solution:

1. Someone else might have connected under your account.

2. If you have been ghosted on the server, your Internet Service Provider can bump the ghost program off.

·        Error #380

Error Message: Invalid Proper Value

Solution:

1. Autodial should be pointed to the correct dialer.

2. Else, set up the dialer again.

·    Error #600

Error Message: An operation is pending

Solution:

1. You should first try to reboot your computer.

2. Ensure that no other program is using your modem.

3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.

4. Make sure that your computer is Spyware free.

·    Error #601

Error Message: The port handle is invalid

Solution:

1. Select the modem's COM port and under the Diagnosis section, open More InfoYou should reboot your computer if you are able to get Ati# responses. Hence, remove the erroneous init string or enter ATZ as the init.

2. You can also reinstall your modem

3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.

4. Your Dialup Networking should be installed again together with its components

5. Your modem might not be working properly. You should then consult your computer manufacturer.

·        Error #602

Error Message: The port is already open

Solution:

1. Try to reboot your computer

2. Ensure that no other program is using the modem

3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem

4. Try uninstalling the AOL Adapters in the Network Control panel and reboot your computer. Install your Dialup Adapter again.

5. Remove the erroneous init string or enter ATZ as the init.

6. If you have Quicken 2000, deactivate the Quicken Download Manager.

7. You should maybe install your modem again.

8. Make sure that your computer is Spyware free.

·        Error #603

Error Message: Caller's buffer is too small

Solution:

1. Ensure that your port speed is not configured to a low speed

2. In your "Port Settings", ensure that FIFO is not set to low.

3. Your Dialup Networking should perhaps be installed again together with its components

4. If you are still having problems, contact your computer manufacturer.

·        Error #604

Error Message: Wrong information specified.

Solution:

1. Ensure that the are no outages within your area

2. Try to enter the username and password again

3. Set up the dialer again

4. Your Dialup Networking should be installed again together with its components

5. You can also try to reinstall your modem

·        Error #605

Error Message: Cannot set port information.

Solution:

1. Ensure that the are no outages within your area

2. Try to enter the username and password again

3. Set up the dialer again

4. Your Dialup Networking should be installed again together with its components

5. You can also try to reinstall your modem

·        Error #606

Error Message: The port is not connected.

Solution:

1. Select the modem's COM port and under the Diagnosis section, open "More Info". You should reboot your computer if you are able to get Ati# responses. Hence, remove the erroneous init string or enter ATZ as the init.

2. You can also reinstall your modem

3. Else press Ctrl-Alt-Delete and if RNAAPP loads, contact a technician to fix this problem.

4. Your modem might not be working properly. You should then consult your computer manufacturer if the problem persists.

·        Error #607

Error Message: The event is invalid.

Solution:

1. If this problem arises while dialing up to the internet, verify that the settings of the event log have been correctly set.

2. Try rebooting your system and ensure that the dialer/network settings have been correctly configured

3. Else, install RAS/DUN again.

·        Error #608

Error Message: The device does not exist.

Solution:

1. Check that the right modem is set in the dialer

2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If it's not the case, set up the correct drivers.

3. Remove and install the dialer again

4. Your modem might not be working properly; try to install it again.

5. You should then consult your computer manufacturer if the problem persists.

·        Error #609

Error Message: The device type does not exist.

Solution:

1. Check that the right modem is selected in the dialer

2. Ensure that you are using the right modem drivers by checking the modem diagnostics. If it's not the case, set up the correct drivers.

3. Your modem might not be working properly; try to install it again.

4. You should then consult your computer manufacturer if the problem persists.

·        Error #610

Error Message: The buffer is invalid.

Solution:

1. Ensure that your port speed is set to low in the modem properties.

2. In your "Port Settings", check that FIFO is not set to low.

3. Remove and install the dialer again.

4. Else, install RAS/DUN again.

5. You should then consult your computer manufacturer if the problem persists.

·   Error #611

Error Message: The route is not available.

Solution:

1. Try to reboot your computer

2. Ensure that you set the right configurations for the dialer and network settings.

3. Else, install the network components again.

4. If you are using a LAN connection, consult your system administrator.

·   Error #612

Error Message: The route is not allocated.

Solution:

1. Reboot your computer

2. Ensure that you set the right configurations for the dialer and network settings.

·       Error #613

Error Message: Invalid compression specified.

Solution:

1. Try to reboot your computer

2. Else, add &K3 to the extra settings.

3. If this still does not solve the problem, add &K3

4. You can also try to reinstall the modem.

·      Error #614

Error Message: Out of buffers.

Solution:

1. Ensure that our port speed is not too low.

2. Try to install your modem again.

·      Error #615

Error Message: The port was not found.

Solution: Try to install your modem drivers.

·   Error #616

Error Message: An asynchronous request is pending.

Solution:

1. Reboot your computer.

2. Try to install your modem drivers again.

·   Error #617

Error Message: The port or device is already disconnecting

Solution:

1. Wait until your modem disconnects properly.

2. If this operation is taking too long, reboot your computer.

·        Error #618

Error Message: The port is not open.

Solution:

1. Reboot your computer

2. Ensure that no other program is making use of the modem.

·        Error #619

Error Message: The port is disconnected.

Solution:

1. Reboot your computer

2. Ensure that no other program is making use of the modem.

·   Error #621

Error Message: Cannot open the phone book file.

Solution: Install Blue Frog connection software again.

·        Error #622

Error Message: Cannot load the phone book file.

Solution: Install Blue Frog connection software again

·        Error #623

Error Message: Cannot find the book entry.

Solution: Install Blue Frog connection software again

·    Error #626

Error Message: Cannot load a string

Solution:

1. Try to reboot your system.

2. Install Blue Frog connection software again

·        Error #627

Error Message: Cannot find key

Solution: Install Blue Frog connection software again

·        Error #628

Error Message: The port was disconnected

Solution:

1. Install Blue Frog connection software again

2. Try to install your modem drivers again.

·        Error #629

Error Message: The port was disconnected by the remote machine.

Solution:

1. Install Blue Frog connection software again

2. Try to enter an alternate Access Number

3. Try to install your modem drivers again.

·        Error #630

Error Message: The port was disconnected due to hardware failure.

Solution:

1. Install Blue Frog connection software again

2. Try to reinstall your modem drivers.

3. Try to use an alternate modem.

4. Else, replace your current modem with a new one.

·        Error #631

Error Message: The port was disconnected by the user.

Solution:

1. Ensure that the right Access Number is being dialed.

2. Try to reboot your computer.

·        Error #632

Error Message: The structure size is incorrect.

Solution:

1. Try to reboot your computer

2. Install Blue Frog connection software again

·        Error #633

Error Message: The port is already in use or is not configured for Remote Access dialout.

Solution:

Try to reboot your computer

Else try to reinstall your modem drivers.

·        Error #634

Error Message: Cannot register your computer on the remote network

Solution:

Try to check your network settings and modify your computer name.

Install the network control panel again.

·        Error #635

Error Message: Unknown Error

Solution:

1. Try to reboot your computer

2. Install Blue Frog connection software again

3. Else try to reinstall your modem drivers.

·        Error #636

Error Message: The wrong device is attached to the port

Solution: Check in your settings if you have chosen the right modem.

·        Error #637

Error Message: The string could not be converted

Solution:

Try to reboot your computer

Install Blue Frog connection software again

·        Error #638

Error Message: The request has timed out.

Solution:

Try to reboot your computer

Install Blue Frog connection software again

·        Error #645

Error Message: Internal authentication error.

Solution:

1. Try to reboot your computer

2. Install Blue Frog connection software again

3. Else try to reinstall your modem drivers.

·   Error #650

Error Message: The Remote Access server is not responding.

Solution:

Check that your connection and network settings have correctly been configured.

Ensure that the modem has been correctly set up and look for updated drivers.

Set FIFO buffers to a lower speed and ensure that you have unchecked the option "Only connect at this speed".

·        Error #676

Error Message: The line is busy

Solution: Ensure that your Access Number is still active and is correctly dialed.

·   Error #678

Error Message: There is no answer.

Solution:

1. First of all check that your phone lines are correctly plugged in.

2. Ensure that the Access Number is correct

3. Else, try another Access number

4. If you are trying to make use of your connection in a bad weather, this might be the source of the problem. Wait until it calms down and try again.

5. Else, install your modem drivers again.

6. If the problem persists, you might need to contact your ISP.

·        Error #680

Error Message: There is no dial tone.

Solution:

First of all check that your phone lines are correctly plugged in.

The phone lines might be damaged. Replace them and try again.

Else, install your modem drivers again.

If the problem persists, you might need to contact your ISP or a technician.

·    Error #691

Error Message: Access denied because username and/or password is invalid on the domain.

Solution:

1. Ensure that you have entered the right username and password.

2. Make sure that your account is active and turned on.

3. You might also try to enter another Access Number.

4. If the problem persists, you might need to contact your ISP.

·    Error #692

Error Message: Hardware failure in port or attached device.

Solution:

Browse for and remove any Blue Frog init strings.

Install Blue Frog connection software again

Else, install your modem drivers again.

·        Error #718

Error Message: PPP Timeout

Solution:

1. Try to reboot your computer

2. Ensure that you have entered the right username and password

3. You might try another Access Number

4. Install Blue Frog connection software again

5. Else, install your modem drivers again.

·   Error #721

Error Message: Remote PPP peer is not responding.

Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialer reads "Allow unsecured Password"

·        Error #734

Error Message: The PPP link control protocol terminated.

Solution: For Windows 2000/XP/Vista operating systems, ensure that the security setting for the dialer reads "Allow unsecured Password"

·        Error #777

Error Message: The connection attempt failed because the modem on the remote computer is out of order.

Solution:

1. Install Blue Frog connection software again

2. Try an alternate modem

3. Install your modem drivers again

4. Else, install a new modem

·        Error #778

Error Message: It was not possible to verify the identity of the server.

Solution:

1. Ensure that you are dialing the correct phone number

2. Verify the connection and Network settings

3. Ensure that you do not have any outrage on the phone number

4. Ensure that you have correctly installed your modem and check for updated drivers.

5. Set FIFO buffers to a lower speed and ensure that you have unchecked the option "Only connect at this speed".

·        Error #779

Error Message: To dial out using this connection, you must use a smart card.

Solution:

1. Ensure that all authorize is allowed in your connection settings in the Security section.

2. Verify that you have correctly set the other dialer settings.

3. Else, create the dialer again.

4. You might need to use the Smart Card Reader as initially setup by the Network Administrator.

·        Error #780

Error Message: An attempted function is not valid for this connection.

Solution: Ensure that the dialer, not the one set up for LAN use though, has been properly installed and has the right settings.

·        Error #781

Error Message: The encryption attempt failed because no valid certificate was found.

Solution: You have to get a valid certificate by registering to the website http://windows.microsoft.com/...

NOTE: The solution for the following problems is already provided in the error messages. If you are still facing problems with them, either contact your ISP or a technician to fix the problem.

·        Error #782

Error Message: Network Address Translation (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing

·        Error #783

Error Message: Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.

·        Error #784

Error Message: You cannot dial using this connection at logon time, because it is configured to use a user name different than the one on the smart card. If you want to use it at logon time, you must configure it to use the user name on the smart card.

·        Error #785

Error Message: You cannot dial using this connection at logon time, because it is not configured to use a smart card. If you want to use it at logon time, you must edit the properties of this connection so that it uses a smart card.

·        Error #786

Error Message: The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.

·   Error #787

Error Message: The L2TP connection attempt failed because the security layer could not authenticate the remote computer.

·        Error #788

Error Message: The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.

·        Error #789

Error Message: The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.

·        Error #790

Error Message: The L2TP connection attempt failed because certificate validation on the remote computer failed.

·        Error #791

Error Message: The L2TP connection attempt failed because security policy for the connection was not found.

·        Error #792

Error Message: The L2TP connection attempt failed because security negotiation timed out.

·        Error #793

Error Message: The L2TP connection attempt failed because an error occurred while negotiating security.

·        Error #794

Error Message: The Framed Protocol RADIUS attribute for this user is not PPP.

·        Error #795

Error Message: The Tunnel Type RADIUS attribute for this user is not correct.

·        Error #796

Error Message: The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.

·        Error #797

Error Message: A connection to the remote computer could not be established because the modem was not found or was busy.

·   Error #798

Error Message: A certificate could not be found that can be used with this Extensible Authentication Protocol.

·   Error #799

Error Message: Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Please ensure that no other client on the network is configured to use 192.168.0.1

·       Error #800

Error Message: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection

Solution:

1. Check your ADSL line as it is probably not synched.

2. Verify that your Security Options are correctly set in your connection options.

3. Either your Network Card or your modem might not work properly. Contact a technician if the problem persists.

·        Error #995

Error Message: Operation aborted.

·        Error #1382

Error Message: Maximum length exceeded.

·        Error #1793

Error Message: Account expired.

·        Error #2250

Error Message: Network connection does not exist.